THE WORLD...OUR PASSION

A A A

  Weighing system

FAGIOLI WEIGHING SYSTEM

CALIBRATED HIGH ACCURACY CERTIFIED MANOMETERS

CONTAINER OFFICE WITH DEDICATED TOOLS TO CALCULATE THE WEIGHT

DETAIL OF MANOMETER

FAGIOLI WEIGHING SYSTEM

LOAD CELLS DETAIL

Fagioli Jack'n Weigh Hydraulic System
The weighing operations can be executed by means of Fagioli Jack'n Weigh hydraulic system, that is composed by hydraulic jacks with load cells and an integrated diesel hydraulic power pack unit, press for load cells calibration, an ISO 20' containers including a site office, computer, printer.

The 100t or 200t hydraulic cylinders shall be positioned underneath strength points of the item being weighed. The item must be stored onto suitable stools allowing our hydraulic jacks positioning.
After hydraulic circuit setting up and commissioning, our Weigh / Site Superintendent will proceed to weigh the item by hydraulic action of jacks and load cells output measurement by Fagioli weighing software. The weighing operation shall be executed 3 times and then interpolated.
Separate load cells up to 200t capacity are available for weighing operations where the jack up operation is executed by Others or by SPMT's hydraulic jacking up action.
The final accuracy will be +/- 1%.

Fagioli Weigh Packs System
The Fagioli Weighing system comprises of a series of weighing packs each consisting of a lifting jack and a calibrated Load cell. The Weigh packs can be supplied as individual units with capacities ranging from 8 Tonne to 868 Tonne per pack. Each pack can be arranged to suit a range of applications and capacities and are capable of an accuracy of better than +/-1 %

Fagioli SPMT's weighing
The heavy Items/ modules being transported by Fagioli SPMT's can be easily weighed too. . The weighing by SPMT's shall be executed by coupling calibrated high accuracy certified manometers to the hydraulic circuits of the transporters, which weigh the heavy item / module jacking up it by their hydraulic rams stroke and reading the oil pressure on the high accuracy manometers (not the same embedded onto SPMT chassis). The values of pressure shall be converted in KN by a Fagioli software reporting the final weight.
The final accuracy will be +/-2%









.
Default page |  Bookmark |  Site map |  Legal |  Info |   |    
Fagioli S.p.A. - Registered address: via G.b. Ferraris 13, S.Ilario d’Enza (RE) - Italy - Share capital Euro 20.000.000 - VAT no. 00674300355
Enrolled in the register of companies of Reggio Emilia n. 00674300355
Copyright 2012 - All rights reserved.